Studio Technologies Model 370A Intercom Beltpack: Two Channels, 5-Pin Female Headset Connector

€732.05
Tax included Delivery: 1 to 3 weeks

Intercom Beltpack: Two Channels, 5-Pin Female Headset Connector

Quantity
Current supply. Ordering availlable

  • 100% secure transactions (3D Secure 2).Payments with: Card, Visa, MasterCard, American Express. PayPal. Local payment methods (iDeal, Sofort, Bancontact, Giropay, MyBank, P24, EPS, ...) 100% secure transactions (3D Secure 2).Payments with: Card, Visa, MasterCard, American Express. PayPal. Local payment methods (iDeal, Sofort, Bancontact, Giropay, MyBank, P24, EPS, ...)
  • As a general rule, packages are sent within 48 hours of receipt of payment, through transport companies of our trust, with tracking number and delivery. As a general rule, packages are sent within 48 hours of receipt of payment, through transport companies of our trust, with tracking number and delivery.
  • Return Policy. See Shipping and Payment Return Policy. See Shipping and Payment

Power Source:
Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts) per IEEE® 802.3af

Network Audio Technology:
Type: Dante audio-over-Ethernet
AES67-2013 Support: yes
Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rate: 48 kHz
Number of Transmitter (Output) Channels: 2
Number of Receiver (Input) Channels: 2
Dante Audio Flows: 4; 2 transmitter, 2 receiver

Network Interface:
Type: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)

Audio Channels: 2 talk, 2 listen

Microphone Input:
Compatibility: dynamic or electret (low-voltage DC-powered) microphones
Type: unbalanced
Electret Microphone Power: 5 volts DC via 2.21 k resistor, selectable on/off
Gain: 22, 30, 42, or 48 dB, selectable, ref. –60 dBu input to Dante output (–20 dBFS nominal)
Frequency Response: 50 Hz to 10 kHz, –3 dB
Distortion (THD+N): <0.02%
Dynamic Range: 75 dB

Compressor:
Threshold: 1 dB above nominal level (–19 dBFS)
Slope: 2:1
Status LED: compressor active

Headphone Output:
Type: 2-channel
Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headsets with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 10 kHz, –3 dB
Distortion (THD+N): <0.002%
Dynamic Range: >100 dB

Call Function:
Signaling Method: 20 kHz, ±800 Hz, within audio channels
Call Send Level: –20 dBFS
Call Receive Level: –27 dBFS minimum

Connectors:
Headset: 5-pin female XLR
Ethernet: Neutrik NE8FBH etherCON RJ45
receptacle
USB: type A receptacle (located inside Model 370A's enclosure and used only for application firmware updates)

Configuration: requires Studio Technologies STcontroller software application, version 1.06.00 and later (STcontroller is compatible with Windows version 7 and later)

Environmental:
Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)
Humidity: 0 to 95%, non-condensing
Altitude: not characterized

Dimensions (Overall):
3.6 inches wide (9.2 cm)
1.6 inches high (4.0 cm)
4.8 inches deep (12.6 cm)

Mounting: intended for portable applications; contains integral belt clip; optional MBK-01 Mounting Bracket Kit allows Model 370A to be permanently mounted

Weight: 0.6 pounds (0.3 kg)

Specifications and information subject to change without notice.

 

M370A

Download

Especificaciones

Download (341.02k)

Reviews

Write your review

Studio Technologies Model 370A Intercom Beltpack: Two Channels, 5-Pin Female Headset Connector

Intercom Beltpack: Two Channels, 5-Pin Female Headset Connector

Write your review